Armchair Dragoons Forums

Other Gaming => Arts & Crafts & 3D Printing => Topic started by: judgedredd on May 10, 2022, 11:23:43 AM

Title: Why 1/48 and 1/35
Post by: judgedredd on May 10, 2022, 11:23:43 AM
Why do model companies make 1/48 scale aircraft but 1/35 scale armour?

I know you can get 1/48 armour - but the standard seems to be 1/35 where the standard for aircraft is 1/48

I wonder what the design decision around that was?
Title: Re: Why 1/48 and 1/35
Post by: bob48 on May 10, 2022, 11:49:23 AM
Maybe because 1/35 scale fits in more with mini's for gaming at 1/32 - 1/35 scale.
Title: Re: Why 1/48 and 1/35
Post by: bayonetbrant on May 10, 2022, 12:36:26 PM
I don't have a good explanation, but since I'm American, I'm just going to blame the metric system and let everyone else over here nod along with me ;D
Title: Re: Why 1/48 and 1/35
Post by: Advocator (Scott) on May 10, 2022, 01:11:52 PM
I'm guessing it has to do with the level of detail. Planes, typically being larger than tanks, can show off about as much detail at 1/48 as a tank can at 1/32 would be my guess.

That and the metric system, of course.
Title: Re: Why 1/48 and 1/35
Post by: mcguire on May 10, 2022, 03:05:10 PM
I don't have a good explanation, but since I'm American, I'm just going to blame the metric system and let everyone else over here nod along with me ;D

 :2thumbs:
Title: Re: Why 1/48 and 1/35
Post by: Staggerwing on May 11, 2022, 06:30:05 AM
I'm guessing it has to do with the level of detail. Planes, typically being larger than tanks, can show off about as much detail at 1/48 as a tank can at 1/32 would be my guess.

I too suspect that this is the case. Probably also why there are lots of 1/72 scale planes but not much armor.
Title: Re: Why 1/48 and 1/35
Post by: bob48 on May 11, 2022, 06:39:33 AM
....yer all barmy. I still like my version the best........... ;D
Title: Re: Why 1/48 and 1/35
Post by: GROGnadsUSA on June 14, 2022, 02:45:35 AM
"I'm guessing it has to do with the level of detail. Planes, typically being larger than tanks, can show off about as much detail at 1/48 as a tank can at 1/32 would be my guess."

"I too suspect that this is the case. Probably also why there are lots of 1/72 scale planes but not much armor."


Hoi y`all, as being some prolific 'Model Kits Collector' for well over 50-years and across several 'Millennia' to date, I found that the smaller kinds were then LESS 'costly' overall, and also "took up" LESS 'space'. It began in the mid-1960s WHEN "Airfix" 'Kits' cost a whole whopping USD-$0.39-cents apiece, 'Paint' was USD $0.10-cents per 'bottle' and 'Glue/Cement' is USD $0.15-cents-a-tube! I'd usually 'construct' any within the day these were purchased, as they are expected with becoming 'utilized' the very next day! true story.  I shall admit to around 600? over such? for having "unbuilt models" with the majority consisting of "1:700th-720th"-'Capital Ships', "1:144th"-'Aircraft/Helicopters'/'Tanks', "1:72nd-76th"-Military Vehicles while occasionally 'delving' into "1:48th"-'Planes'-("W.W.I", some 'Tanks' primarily "Aurora"). The latest "1:35th"-'Vehicle' I'd garnered is this: It does lack "interior details" that even many smaller types will then have. An acquaintance of mine got primarily "Bandai"--"1:48th" and whenever I ran across them, I'd buy that with him in mind.

(https://fantastic-plastic.com/uploads/3/5/5/3/35539432/3439255_orig.jpg)
(https://fantastic-plastic.com/uploads/3/5/5/3/35539432/5802592_orig.jpg)

Title: Re: Why 1/48 and 1/35
Post by: Staggerwing on June 14, 2022, 06:37:56 AM
I never could figure out what the designer of the M577 was thinking. It may look cool but it has practically no ground clearance. It might kick ass on undamaged pavement but off road even a few big rocks or a small stream would cause it to get stuck.
Title: Re: Why 1/48 and 1/35
Post by: GROGnadsUSA on June 14, 2022, 06:43:17 PM
I never could figure out what the designer of the M577 was thinking. It may look cool but it has practically no ground clearance. It might kick ass on undamaged pavement but off road even a few big rocks or a small stream would cause it to get stuck.
"Forget it 'Mate', it's "Hollywood"-nearby to 'Chinatown"-no doubt! DOWN on the 'Boulevard' where 'Life' is hard... 
THEY 'l@@k' at thus with such 'disregard'!
Title: Re: Why 1/48 and 1/35
Post by: tuna on August 05, 2022, 07:13:35 PM
Planes is probably due to size and accommodating people's shelf space. I think 1/48 Armor is relatively 'new' in scale modeling time, i.e. a lot of kits started coming out a couple decades ago (Tamiya), think it was because they figured modelers wanted to do diorama's mixing the two. When you were a kid and wanted to 'play' with your models 1/72 was the way to go!  :groovy:
Title: Re: Why 1/48 and 1/35
Post by: GROGnadsUSA on August 08, 2022, 07:59:30 PM
Planes is probably due to size and accommodating people's shelf space. I think 1/48 Armor is relatively 'new' in scale modeling time, i.e. a lot of kits started coming out a couple decades ago (Tamiya), think it was because they figured modelers wanted to do diorama's mixing the two. When you were a kid and wanted to 'play' with your models 1/72 was the way to go! :groovy:
No "LIE" `bout that! I used to begin a 'Model Kit' right after "School" with having this 'completed' that same night! The next day was when I'd "trot out" that-(usually either 'Plane or 'Tank/Vehicle')-while never having tried and used  'Airbrush' "trappings". Although I seem to recall an early 'Tamiya'-kit in "1:50th"-'scale'-(?) or plenty of "1:100th"-'scale' kind primarily consisting of 'Commercial Airplane'-kits by 'Heller'(?). Them "Bi-Planes" were an especially 'vexing'-sort, as the 'struts' took awhile to "set" in place and required constant 'vigilance' since these tended to "slant" everyways and kept at "it" before FINALLY 'hardening' of the 'Glue' and staying 'positioned'!